![]() ![]() Locate USB drivers under Universal Serial Bus controllers and right-click on it to select Update driver option and let the device download the latest available drivers from the web. Hit Enter and open the Device Manager menu. My problem is that I do not know my way around the BIOS, at least with respect to such things as adding controller values, toggling Legacy support, and so forth.Īll I've accomplished so far is to get pretty confused. Press the Windows key on your device and search for the Device Manager. So, maybe if I add or change some lines in the BIOS, then Drive Image in its DOS mode might be able to detect my USB hard drive. The copy seems to work OK and when I swap the drives over (machine is a Dell D800 with BIOS level A11), it boots OK, up to the point of displaying the logon screen. However, from everything I read, it seems that my BIOS is missing instructions to load the USB drivers at the proper point when DOS could use them. Having just bought Ghost V9, I tried to create a complete disk copy (using the utility of the same name within Ghost) to a USB2 connected laptop drive. I don't know whether any of the above is pertinent to me, since my Windows 98SE recognizes my USB hard drive. My hard drives are 3.5' drives set up in a powered enclosure and connected to the minipc with OMV via USB 3. Unfortunately OMV doesnt seem to be detecting my hard drives. Also with F-Secure, McAfee, Bitdefender and just using plain Windows Defender - no problems. I have installed OMV 6 and am trying to set up the hard disk pool. I know for a fact it is Norton, because I have tested several antivirus vendors lately. You can then boot the floppy that loads the drivers and switch to the floppy that contains Drive Image." Yet Norton wont allow me to eject USB hard drive. You may need to do this on a different floppy than the bootable floppy that Drive Image creates, since there is very little space available on it. If you plan on running Drive Image after booting from floppy disk, then you will need to create a bootable floppy that contains an AUTOEXEC.BAT and CONFIG.SYS that load the drivers. ![]() During this boot procedure, those are the files used to boot instead of the DOSSTART.BAT. If you plan on running Drive Image after booting straight into DOS mode by pressing F8 during bootup and then choosing to boot to the Command Prompt Only, the drivers need to be loaded into the AUTOEXEC.BAT. I have offsite backup enabled to a USB drive with an alias assigned to that drive (XP SP3). If you plan to run Drive Image this way, you need to also install the DOS drivers and then copy into the DOSSTART.BAT the lines the installation adds to the AUTOEXEC.BAT. The DOSSTART.BAT is located in the Windows subdirectory and is used by Windows instead of your AUTOEXEC.BAT when you Shut Down and Restart the computer in DOS Mode. If you run Drive Image by booting into Windows 95, selecting the icon for Drive Image, and allowing it to boot to DOS, then you need to modify the DOSSTART.BAT to include the drivers. "Depending on how you start DOS, there are three scenarios for loading drivers: Cloning a bootable HDD to anothe bootable HDD, when both are connected to the same computer is quite safe. More on my problems getting DOS to detect my USB drive: Info from Drive Image (which I have and which, so far, does not see my USB device): ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |